Product image from the manufacturer or its official distributor, reproduced to identify the model (legal notice).
K2 Pro
The Creality K2 Pro is a FDM 3D printer released in 2025 by Creality, with a build volume of 300³ mm and MSRP of $849. Compatible with multi-material system CFS (4 slots). Enclosed chamber. Active heated chamber. Maximum speed 600 mm/s. Current status: active.
Manufacturer's suggested retail price (MSRP). Not the store price — the actual price may vary.
👁 8 views · 5 this month · 2 this week
Technical specifications
| Technology | FDM |
|---|---|
| Build volume | 300³ mm |
| Weight | 23.7 kg |
| Max speed | 600 mm/s |
| Max acceleration | 20,000 mm/s² |
| Max nozzle temp | 300 °C |
| Nozzle material | hardened steel |
| Drive | direct |
| Flow rate | — |
| Max bed temp | 110 °C |
| Bed material | PEI |
| Auto-leveling | full-auto |
| Enclosed | Yes |
| Heated chamber | Yes |
| AMS compatible | Yes (CFS, 4 slots) |
| WiFi | Yes |
| Camera included | Yes () |
| Official slicer | Creality Print 6.0 |
| OrcaSlicer support | — |
| Power | 1300 W |
| Noise | — |
What materials can the K2 Pro print?
This comes from four facts on its spec sheet: the nozzle reaches 300 °C, the bed 110 °C, and the machine is enclosed with a direct-drive extruder. Those four facts decide most of the list: nozzle temperature sets the ceiling on what you can melt, the bed decides whether the first layer sticks, the enclosure keeps large parts from warping, and the extruder type rules flexibles. We don't test the machine — this is guidance derived from verified data, not a guarantee.
In short: it prints PLA, PETG, TPU (flexible), ABS, ASA, Nylon (PA), Policarbonato (PC) without a fight.
- PLAYes
Yes. PLA has no special needs: any FDM printer like the K2 Pro prints it out of the box.
- PETGYes
Yes. With a nozzle up to 300 °C and a bed up to 110 °C it comfortably meets PETG's needs.
- TPU (flexible)Yes
Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow).
- ABSYes
Yes. Nozzle up to 300 °C and an enclosure: it contains ABS's warping and fumes.
- ASAYes
Yes. Nozzle up to 300 °C and an enclosure: it contains ASA's warping and fumes.
- Nylon (PA)Yes
Yes. It reaches 300 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle.
- Policarbonato (PC)Yes
Yes. Nozzle up to 300 °C and an enclosure with active heating: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle.
| Material | Prints it? | Why |
|---|---|---|
| PLA | Yes | Yes. PLA has no special needs: any FDM printer like the K2 Pro prints it out of the box. |
| PETG | Yes | Yes. With a nozzle up to 300 °C and a bed up to 110 °C it comfortably meets PETG's needs. |
| TPU (flexible) | Yes | Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow). |
| ABS | Yes | Yes. Nozzle up to 300 °C and an enclosure: it contains ABS's warping and fumes. |
| ASA | Yes | Yes. Nozzle up to 300 °C and an enclosure: it contains ASA's warping and fumes. |
| Nylon (PA) | Yes | Yes. It reaches 300 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle. |
| Policarbonato (PC) | Yes | Yes. Nozzle up to 300 °C and an enclosure with active heating: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle. |
Popular comparisons
Community reviews
No reviews for this printer yet. Own it? Be the first. 👇
User opinions, moderated before publishing. hotend doesn't verify purchases.
Sources & references
Specs cross-checked against these public sources:
- 3DPros - Creality K2 Pro Specs Databaseaggregator
Specs checked against the sources cited above on 19/06/2026. Confidence in the data: high.