Creality K2 Pro vs Sovol SV08
The Creality K2 Pro (2025, $849) and the Sovol SV08 (2024, €599) are two FDM 3D printers many people compare before buying.
The Sovol SV08 is the more affordable of the two, with a gap of about 250 (~29%) versus the other.
On the technical side, only the Creality K2 Pro is enclosed (better for ABS and technical materials), and only the Creality K2 Pro supports multicolor (AMS).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Creality K2 Pro $849 | Sovol SV08 €599 | |
|---|---|---|
| Geometry | ||
| Build volume | 300³ mm | 350×350×345 mm 🏆 |
| Weight | 23.7 kg | 23 kg |
| Speed | ||
| Max speed | 600 mm/s | 700 mm/s 🏆 |
| Max acceleration | 20,000 mm/s² | 40,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | hardened steel | hardened steel |
| Drive type | direct | direct |
| Flow rate | — | 40 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 110 °C 🏆 | 100 °C |
| Bed material | PEI | PEI plate |
| Auto-leveling | full-auto | auto mesh (4 indep Z motors) |
| Enclosed | Yes 🏆 | No |
| Heated chamber | Yes 🏆 | No |
| Multimaterial | ||
| AMS compatible | Yes 🏆 | No |
| AMS type | CFS | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | Yes |
| Camera | Yes () | Yes (1080p) |
| Calibration | ||
| Measures its own vibrations (built-in sensor) | — | — |
| Calibrates flow by itself (sensor) | Yes | — |
| Input shaping | — | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Creality Print 6.0 | OrcaSlicer (Sovol fork) |
| OrcaSlicer | — | Yes |
| Noise | ||
| Noise | — | — |
| Power | 1300 W | 1000 W 🏆 |
Verdict
- If speed matters most, the Sovol SV08 wins.
- On price, Sovol SV08 is cheaper.
Frequently asked
- Which has better value: Creality K2 Pro or Sovol SV08?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Sovol SV08 with 350×350×345 mm.