Product image from the manufacturer or its official distributor, reproduced to identify the model (legal notice).
M1 Pro
The Artillery M1 Pro is a FDM 3D printer released in 2025 by Artillery, with a build volume of 260³ mm and MSRP of €349. Enclosed chamber. Active heated chamber. Maximum speed 600 mm/s. Current status: active.
Manufacturer's suggested retail price (MSRP). Not the store price — the actual price may vary.
👁 6 views · 1 this month · 0 this week
Technical specifications
| Technology | FDM |
|---|---|
| Build volume | 260³ mm |
| Weight | 14 kg |
| Max speed | 600 mm/s |
| Max acceleration | 20,000 mm/s² |
| Max nozzle temp | 320 °C |
| Nozzle material | hardened steel |
| Drive | direct |
| Flow rate | — |
| Max bed temp | 120 °C |
| Bed material | PEI |
| Auto-leveling | auto |
| Enclosed | Yes |
| Heated chamber | Yes |
| AMS compatible | No |
| WiFi | Yes |
| Camera included | Yes () |
| Official slicer | Orca Slicer / Artillery Slicer |
| OrcaSlicer support | — |
| Power | 1150 W |
| Noise | — |
What materials can the M1 Pro print?
This comes from four facts on its spec sheet: the nozzle reaches 320 °C, the bed 120 °C, and the machine is enclosed with a direct-drive extruder. Those four facts decide most of the list: nozzle temperature sets the ceiling on what you can melt, the bed decides whether the first layer sticks, the enclosure keeps large parts from warping, and the extruder type rules flexibles. We don't test the machine — this is guidance derived from verified data, not a guarantee.
In short: it prints PLA, PETG, TPU (flexible), ABS, ASA, Nylon (PA), Policarbonato (PC) without a fight.
- PLAYes
Yes. PLA has no special needs: any FDM printer like the M1 Pro prints it out of the box.
- PETGYes
Yes. With a nozzle up to 320 °C and a bed up to 120 °C it comfortably meets PETG's needs.
- TPU (flexible)Yes
Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow).
- ABSYes
Yes. Nozzle up to 320 °C and an enclosure: it contains ABS's warping and fumes.
- ASAYes
Yes. Nozzle up to 320 °C and an enclosure: it contains ASA's warping and fumes.
- Nylon (PA)Yes
Yes. It reaches 320 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle.
- Policarbonato (PC)Yes
Yes. Nozzle up to 320 °C and an enclosure with active heating: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle.
| Material | Prints it? | Why |
|---|---|---|
| PLA | Yes | Yes. PLA has no special needs: any FDM printer like the M1 Pro prints it out of the box. |
| PETG | Yes | Yes. With a nozzle up to 320 °C and a bed up to 120 °C it comfortably meets PETG's needs. |
| TPU (flexible) | Yes | Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow). |
| ABS | Yes | Yes. Nozzle up to 320 °C and an enclosure: it contains ABS's warping and fumes. |
| ASA | Yes | Yes. Nozzle up to 320 °C and an enclosure: it contains ASA's warping and fumes. |
| Nylon (PA) | Yes | Yes. It reaches 320 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle. |
| Policarbonato (PC) | Yes | Yes. Nozzle up to 320 °C and an enclosure with active heating: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle. |
Popular comparisons
Community reviews
No reviews for this printer yet. Own it? Be the first. 👇
User opinions, moderated before publishing. hotend doesn't verify purchases.
Sources & references
Specs cross-checked against these public sources:
Specs checked against the sources cited above on 19/06/2026. Confidence in the data: high.