Anycubic Kobra 2 Pro vs Elegoo Neptune 4
The Anycubic Kobra 2 Pro (2023, €369) and the Elegoo Neptune 4 (2023, €249) are two FDM 3D printers many people compare before buying.
The Elegoo Neptune 4 is the more affordable of the two, with a gap of about 120 (~33%) versus the other.
On the technical side, the Elegoo Neptune 4 offers more build volume (225×225×265 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Anycubic Kobra 2 Pro €369 | Elegoo Neptune 4 €249 | |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×250 mm | 225×225×265 mm 🏆 |
| Weight | 8.5 kg | 8.3 kg |
| Speed | ||
| Max speed | 500 mm/s | 500 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 260 °C | 300 °C 🏆 |
| Nozzle material | brass | — |
| Drive type | direct | direct |
| Flow rate | 25 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 110 °C | 110 °C |
| Bed material | PEI plate | PEI |
| Auto-leveling | LeviQ 2.0 | 121-point automatic (inductive sensor) |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | No |
| Ethernet | No | — |
| Camera | — | — |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | No | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Anycubic Slicer Next | Cura (Elegoo edition) |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | 50 dB 🏆 |
| Power | 350 W | 310 W 🏆 |
Verdict
- On price, Elegoo Neptune 4 is cheaper.
Frequently asked
- Which has better value: Anycubic Kobra 2 Pro or Elegoo Neptune 4?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Elegoo Neptune 4 with 225×225×265 mm.