Anycubic Kobra 2 Pro vs Bambu Lab A2L
👁 This comparison has been viewed 5 times · 0 this month · 0 this week
The Anycubic Kobra 2 Pro (2023, €369) and the Bambu Lab A2L (2026, €379) are two FDM 3D printers many people compare before buying.
On the technical side, only the Bambu Lab A2L supports multicolor (AMS), and the Bambu Lab A2L offers more build volume (330×320×325 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Anycubic Kobra 2 Pro €369 | Bambu Lab A2L €379 | |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×250 mm | 330×320×325 mm 🏆 |
| Weight | 8.5 kg | 12.8 kg |
| Speed | ||
| Max speed | 500 mm/s | 500 mm/s |
| Max acceleration | 20,000 mm/s² 🏆 | 10,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 260 °C | 300 °C 🏆 |
| Nozzle material | brass | stainless steel |
| Drive type | direct | direct |
| Flow rate | 25 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 110 °C 🏆 | 80 °C |
| Bed material | PEI plate | Textured PEI plate |
| Auto-leveling | LeviQ 2.0 | hands-free auto + offset |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | Yes 🏆 |
| AMS type | — | lite |
| AMS slots | — | 4 🏆 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | No |
| Camera | — | Yes (1080p) |
| Calibration | ||
| Vibration compensation | Yes | Yes |
| Flow calibration | No | Yes |
| Input shaping | Yes | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Anycubic Slicer Next | Bambu Studio |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | — | 52 dB 🏆 |
| Power | 350 W 🏆 | — |
Verdict
- On price, Anycubic Kobra 2 Pro is cheaper.
Frequently asked
- Which has better value: Anycubic Kobra 2 Pro or Bambu Lab A2L?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Bambu Lab A2L with 330×320×325 mm.