Product image from the manufacturer or its official distributor, reproduced to identify the model (legal notice).
Adventurer 5M
The Flashforge Adventurer 5M is a FDM 3D printer released in 2023 by Flashforge, with a build volume of 220³ mm and MSRP of €299. Claimed maximum speed: 600 mm/s.
Manufacturer's suggested retail price (MSRP). Not the store price — the actual price may vary.
Our take on the Adventurer 5M
The Adventurer 5M is Flashforge's entry-level printer with an all-metal CoreXY frame: 220 × 220 × 220 mm, up to 600 mm/s and 20,000 mm/s² acceleration, a 280 °C nozzle that swaps in seconds and automatic levelling. Flashforge presents it as beginner-friendly, with setup in 10 minutes or less.
Within the same family, the Adventurer 5M Pro adds an enclosure and the AD5X adds the IFS multicolour system. It can be sliced with FlashPrint, Orca-Flashforge or FlashMaker.
Worth knowing: it's open-frame, so for ABS or ASA, which warp without an enclosure, the Pro version is the better fit. If you're starting with it, how to compare 3D printers explains which specs really matter.
Written from its specs and the sources cited at the end of this page; we haven't tested it in person.
Technical specifications
| Technology | FDM |
|---|---|
| Build volume | 220³ mm |
| Weight | 10.8 kg |
| Max speed | 600 mm/s |
| Max acceleration | 20,000 mm/s² |
| Max nozzle temp | 280 °C |
| Nozzle material | brass |
| Drive | direct |
| Flow rate | 32 mm³/s |
| Max bed temp | 110 °C |
| Bed material | PEI plate (dual-sided) |
| Auto-leveling | auto mesh one-click |
| Enclosed | No |
| Heated chamber | No |
| AMS compatible | No |
| WiFi | Yes |
| Camera included | No |
| Official slicer | FlashPrint / Orca-Flashforge |
| OrcaSlicer support | Yes |
| Power | 350 W |
| Noise | — |
What materials can the Adventurer 5M print?
This comes from four facts on its spec sheet: the nozzle reaches 280 °C, the bed 110 °C, and the machine is open-frame with a direct-drive extruder. Those four facts decide most of the list: nozzle temperature sets the ceiling on what you can melt, the bed decides whether the first layer sticks, the enclosure keeps large parts from warping, and the extruder type rules flexibles. We don't test the machine — this is guidance derived from verified data, not a guarantee.
In short: it prints PLA, PETG, TPU (flexible) without a fight, and it can reach ABS, ASA, Nylon (PA), Policarbonato (PC) with conditions — the detail for each is below.
| Material | Prints it? | Why |
|---|---|---|
| PLA | Yes | Yes. PLA has no special needs: any FDM printer like the Adventurer 5M prints it out of the box. |
| PETG | Yes | Yes. With a nozzle up to 280 °C and a bed up to 110 °C it comfortably meets PETG's needs. |
| TPU (flexible) | Yes | Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow). |
| ABS | With caveats | With caveats. It reaches 280 °C, but it's open-frame: ABS can warp and ventilation is advised. Doable in a draft-free spot or by adding an enclosure. |
| ASA | With caveats | With caveats. It reaches 280 °C, but it's open-frame: ASA can warp and ventilation is advised. Doable in a draft-free spot or by adding an enclosure. |
| Nylon (PA) | With caveats | With caveats. It reaches 280 °C but is open-frame; Nylon warps in drafts and absorbs moisture. Enclosure + drying almost mandatory. For carbon-fibre variants, use a hardened-steel nozzle. |
| Policarbonato (PC) | With caveats | With caveats. It has the temperature (280 °C) but is open-frame; PC warps badly without an enclosure. Only with one added. For carbon-fibre variants, use a hardened-steel nozzle. |
Need the materials it struggles with? These printers handle them
ABS, ASA, Nylon (PA), Policarbonato (PC)
Popular comparisons
Own the Adventurer 5M? Write a review
User opinions, moderated before publishing. hotend doesn't verify purchases.
Sources & references
Specs cross-checked against these public sources:
- Web oficial fabricanteManufacturer page
Specs taken from the sources cited above; we have no recorded date for the last check. Confidence in the data: medium.