Creality Ender 3 V3 KE vs Flashforge Adventurer 5M
👁 This comparison has been viewed 4 times · 2 this month · 0 this week
The Creality Ender 3 V3 KE (2023, €279) and the Flashforge Adventurer 5M (2023, €299) are two FDM 3D printers many people compare before buying.
On the technical side, the Creality Ender 3 V3 KE offers more build volume (220×220×240 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Creality Ender 3 V3 KE €279 | Flashforge Adventurer 5M €299 | |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×240 mm | 220³ mm |
| Weight | 7.8 kg | 10.8 kg |
| Speed | ||
| Max speed | 500 mm/s | 600 mm/s 🏆 |
| Max acceleration | 8,000 mm/s² | 20,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C 🏆 | 280 °C |
| Nozzle material | copper alloy | brass |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s | 32 mm³/s |
| Bed | ||
| Max bed temp | 100 °C | 110 °C 🏆 |
| Bed material | PEI plate | PEI plate (dual-sided) |
| Auto-leveling | CR Touch + strain gauge | auto mesh one-click |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | Yes |
| Camera | — | — |
| Calibration | ||
| Vibration compensation | Yes | Yes |
| Flow calibration | Yes | No |
| Input shaping | Yes | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Creality Print | FlashPrint / Orca-Flashforge |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | — | — |
| Power | 350 W | 350 W |
Verdict
- If speed matters most, the Flashforge Adventurer 5M wins.
- On price, Creality Ender 3 V3 KE is cheaper.
Frequently asked
- Which has better value: Creality Ender 3 V3 KE or Flashforge Adventurer 5M?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Flashforge Adventurer 5M with 220³ mm.