Product image from the manufacturer or its official distributor, reproduced to identify the model (legal notice).
H2D
The Bambu Lab H2D is a FDM 3D printer released in 2025 by Bambu Lab, with a build volume of 350×320×325 mm and MSRP of €1,899. Compatible with AMS HT (4 slots). Enclosed chamber. Active heated chamber. Claimed maximum speed: 1000 mm/s.
Manufacturer's suggested retail price (MSRP). Not the store price — the actual price may vary.
Our take on the H2D
The H2D is Bambu Lab's dual-nozzle printer: it prints in 350 × 320 × 325 mm, with a nozzle up to 350 °C, an actively heated chamber up to 65 °C and a closed-loop servo extruder. It also takes an optional 10 or 40 W laser module for engraving and cutting.
For motion accuracy it uses a vision encoder plate that, according to Bambu Lab, delivers 50-micron accuracy. It calibrates flow dynamics automatically by measuring extrusion force with an eddy-current sensor. Against the X1E, it adds the second nozzle, more volume and more temperature.
Worth knowing: it's a large, high-end machine, aimed at people who'll make use of the two nozzles, engineering materials or the laser. For many colours it pairs with the AMS (what is the AMS).
Written from its specs and the sources cited at the end of this page; we haven't tested it in person.
Technical specifications
| Technology | FDM |
|---|---|
| Build volume | 350×320×325 mm |
| Weight | 31 kg |
| Max speed | 1000 mm/s |
| Max acceleration | 20,000 mm/s² |
| Max nozzle temp | 350 °C |
| Nozzle material | hardened steel |
| Drive | direct |
| Flow rate | 40 mm³/s |
| Max bed temp | 120 °C |
| Bed material | Dual-Sided Textured PEI Plate |
| Auto-leveling | Vision encoder + load cell |
| Enclosed | Yes |
| Heated chamber | Yes |
| AMS compatible | Yes (AMS HT (4 slots)) |
| WiFi | Yes |
| Camera included | Yes (1080p) |
| Official slicer | Bambu Studio |
| OrcaSlicer support | Yes |
| Power | 1800 W |
| Noise | — |
What materials can the H2D print?
This comes from four facts on its spec sheet: the nozzle reaches 350 °C, the bed 120 °C, and the machine is enclosed with a direct-drive extruder. Those four facts decide most of the list: nozzle temperature sets the ceiling on what you can melt, the bed decides whether the first layer sticks, the enclosure keeps large parts from warping, and the extruder type rules flexibles. We don't test the machine — this is guidance derived from verified data, not a guarantee.
In short: it prints PLA, PETG, TPU (flexible), ABS, ASA, Nylon (PA), Policarbonato (PC) without a fight.
| Material | Prints it? | Why |
|---|---|---|
| PLA | Yes | Yes. PLA has no special needs: any FDM printer like the H2D prints it out of the box. |
| PETG | Yes | Yes. With a nozzle up to 350 °C and a bed up to 120 °C it comfortably meets PETG's needs. |
| TPU (flexible) | Yes | Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow). |
| ABS | Yes | Yes. Nozzle up to 350 °C and an enclosure: it contains ABS's warping and fumes. |
| ASA | Yes | Yes. Nozzle up to 350 °C and an enclosure: it contains ASA's warping and fumes. |
| Nylon (PA) | Yes | Yes. It reaches 350 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle. |
| Policarbonato (PC) | Yes | Yes. Nozzle up to 350 °C and an enclosure with active heating: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle. |
Popular comparisons
Own the H2D? Write a review
User opinions, moderated before publishing. hotend doesn't verify purchases.
Sources & references
Specs cross-checked against these public sources:
- Web oficial fabricanteManufacturer page
- Bambu Lab Wiki — Flow Dynamics Calibration (calibración automática de presión y flujo)Manufacturer pageretrieved10/7/2026
Specs taken from the sources cited above; we have no recorded date for the last check. Confidence in the data: medium.