Elegoo OrangeStorm Giga vs Prusa Research XL

👁 This comparison has been viewed 3 times · 0 this month · 0 this week

The Elegoo OrangeStorm Giga (2023, €2,399) and the Prusa Research XL (2023, €1,999) are two FDM 3D printers many people compare before buying.

The Prusa Research XL is the more affordable of the two, with a gap of about 400 (~17%) versus the other.

On the technical side, the Elegoo OrangeStorm Giga offers more build volume (800×800×1000 mm).

Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.

← Swipe to see more →

Specifications
Elegoo
OrangeStorm Giga
€2,399
Prusa Research
XL
€1,999
Geometry
Build volume 800×800×1000 mm 🏆 360³ mm
Weight 145 kg 33.7 kg
Speed
Max speed 300 mm/s 350 mm/s 🏆
Max acceleration 5,000 mm/s² 10,000 mm/s² 🏆
Hot-end
Max nozzle temp 300 °C 🏆 290 °C
Nozzle material brass hardened steel
Drive type direct direct
Flow rate 30 mm³/s 🏆
Bed
Max bed temp 100 °C 120 °C 🏆
Bed material Magnetic PEI Steel PEI plate (segmented)
Auto-leveling automatic (contactless high-precision sensor) load cell auto mesh
Enclosed No No
Heated chamber No No
Multimaterial
AMS compatible No No
AMS type toolchanger
AMS slots 5 🏆
Connectivity
WiFi Yes Yes
Ethernet Yes
Camera
Calibration
Vibration compensation Yes
Flow calibration No
Input shaping Yes
Pressure advance Yes
Software
Official slicer PrusaSlicer
OrcaSlicer Yes
Noise
Noise
Power 350 W 🏆

Verdict

Frequently asked

Which has better value: Elegoo OrangeStorm Giga or Prusa Research XL?
See the full spec table for the best decision based on your use case.
Which has the larger build volume?
Elegoo OrangeStorm Giga with 800×800×1000 mm.

More comparisons