Bambu Lab H2S vs Creality K2 Plus
Full 2026 comparison: side-by-side specs and data-driven verdict.
← Swipe to see more →
| Specifications | Bambu Lab H2S €1,149 | Creality K2 Plus €1,499 |
|---|---|---|
| Geometry | ||
| Build volume | 340×320×340 mm | 350³ mm 🏆 |
| Weight | 30 kg | 27 kg |
| Speed | ||
| Max speed | 1000 mm/s 🏆 | 600 mm/s |
| Max acceleration | 20,000 mm/s² | 30,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 350 °C | 350 °C |
| Nozzle material | hardened steel | hardened steel |
| Drive type | direct | direct |
| Flow rate | 40 mm³/s | 40 mm³/s |
| Bed | ||
| Max bed temp | 110 °C | 120 °C 🏆 |
| Bed material | Dual-Sided Textured PEI Plate | PEI plate |
| Auto-leveling | Vision encoder + load cell | LIDAR + strain gauge |
| Enclosed | Yes | Yes |
| Heated chamber | Yes | Yes |
| Multimaterial | ||
| AMS compatible | Yes | Yes |
| AMS type | ht | CFS |
| AMS slots | 4 | 4 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | Yes |
| Camera | Yes (1080p) | Yes (1080p) |
| Calibration | ||
| Vibration compensation | Yes | Yes |
| Flow calibration | Yes | Yes |
| Input shaping | Yes | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Bambu Studio | Creality Print |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | 50 dB 🏆 | — |
| Power | 1800 W | 1000 W 🏆 |
Verdict
- If speed matters most, the Bambu Lab H2S wins (1000 mm/s vs 600 mm/s).
- On price, Bambu Lab H2S is cheaper.
Frequently asked
- Which has better value: Bambu Lab H2S or Creality K2 Plus?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Creality K2 Plus with 350³ mm.