Bambu Lab A1 vs Creality K2
👁 This comparison has been viewed 2 times · 0 this month · 0 this week
The Bambu Lab A1 (2023, €399) and the Creality K2 (2025, €359) are two FDM 3D printers many people compare before buying.
The Creality K2 is the more affordable of the two, with a gap of about 40 (~10%) versus the other.
On the technical side, only the Creality K2 is enclosed (better for ABS and technical materials), and the Creality K2 offers more build volume (260³ mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Bambu Lab A1 €399 | Creality K2 €359 | |
|---|---|---|
| Geometry | ||
| Build volume | 256³ mm | 260³ mm 🏆 |
| Weight | 8.3 kg | 18.3 kg |
| Speed | ||
| Max speed | 500 mm/s | 600 mm/s 🏆 |
| Max acceleration | 10,000 mm/s² | 20,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | stainless steel | Titanium heatbreak, copper body, hardened steel tip |
| Drive type | direct | direct |
| Flow rate | 28 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 100 °C | 100 °C |
| Bed material | PEI plate | PEI-coated flexible magnetic steel |
| Auto-leveling | load cell + auto mesh | Smart Auto Leveling (strain sensor) |
| Enclosed | No | Yes 🏆 |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes | Yes |
| AMS type | lite | CFS |
| AMS slots | 4 | 4 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | — |
| Camera | Yes (1080p) | Yes () |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Bambu Studio | Creality Print |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | 48 dB 🏆 | — |
| Power | 1300 W 🏆 | — |
Verdict
- If speed matters most, the Creality K2 wins.
- On price, Creality K2 is cheaper.
Frequently asked
- Which has better value: Bambu Lab A1 or Creality K2?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Creality K2 with 260³ mm.