Anycubic Kobra X vs Creality K2
The Anycubic Kobra X (2026, €389) and the Creality K2 (2025, €359) are two FDM 3D printers many people compare before buying.
The Creality K2 is the more affordable of the two, with a gap of about 30 (~8%) versus the other.
On the technical side, only the Creality K2 is enclosed (better for ABS and technical materials).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Anycubic Kobra X €389 | Creality K2 €359 | |
|---|---|---|
| Geometry | ||
| Build volume | 260³ mm | 260³ mm |
| Weight | 9.5 kg | 18.3 kg |
| Speed | ||
| Max speed | 600 mm/s | 600 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | Hardened steel | Titanium heatbreak, copper body, hardened steel tip |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 100 °C | 100 °C |
| Bed material | PEI | PEI-coated flexible magnetic steel |
| Auto-leveling | LeviQ 3.0 (49-point mesh) | Smart Auto Leveling (strain sensor) |
| Enclosed | No | Yes 🏆 |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes | Yes |
| AMS type | ACE Pro | CFS |
| AMS slots | 4 | 4 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | — |
| Camera | Yes () | Yes () |
| Calibration | ||
| Measures its own vibrations (built-in sensor) | Yes | — |
| Calibrates flow by itself (sensor) | — | No |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Anycubic Slicer Next | Creality Print |
| OrcaSlicer | — | — |
| Noise | ||
| Noise | 45 dB 🏆 | — |
| Power | 1450 W 🏆 | — |
Verdict
- On price, Creality K2 is cheaper.
Frequently asked
- Which has better value: Anycubic Kobra X or Creality K2?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Creality K2 with 260³ mm.