Product image from the manufacturer or its official distributor, reproduced to identify the model (legal notice).
Photon P1
The Anycubic Photon P1 is a MSLA 3D printer released in 2026 by Anycubic, with a build volume of 223×126×230 mm and MSRP of €549. Enclosed chamber.
Manufacturer's suggested retail price (MSRP). Not the store price — the actual price may vary.
Technical specifications
| Technology | MSLA |
|---|---|
| Build volume | 223×126×230 mm |
| Weight | — |
| Max speed | — |
| Max acceleration | — |
| Max nozzle temp | — |
| Nozzle material | — |
| Drive | — |
| Flow rate | — |
| Max bed temp | — |
| Bed material | — |
| Auto-leveling | Intelligent Leveling System 3.0 (pressure sensor assisted) |
| Enclosed | Yes |
| Heated chamber | No |
| AMS compatible | No |
| WiFi | Yes |
| Camera included | Yes () |
| Official slicer | Photon Workshop 4.0 |
| OrcaSlicer support | — |
| Power | — |
| Noise | — |
What materials can the Photon P1 print?
The Photon P1 is a resin printer; what follows are the resins it supports, derived from its verified specs.
The Photon P1 is a resin printer (MSLA): it doesn't use filament. It works with standard 405 nm UV resins from virtually any brand (open system): standard, ABS-like/tough, water-washable, flexible and castable. Engineering or high-temperature resins depend on LCD power and ventilation; follow the resin maker's guidance.
Popular comparisons
Own the Photon P1? Write a review
User opinions, moderated before publishing. hotend doesn't verify purchases.
Sources & references
Specs cross-checked against these public sources:
- Anycubic Official Store – Photon P1manufacturer
- Anycubic EU Store – Photon P1 (€549)manufacturer
Specs checked against the sources cited above on 19/06/2026. Confidence in the data: medium.