Product image from the manufacturer or its official distributor, reproduced to identify the model (legal notice).
Photon Mono M5s Pro
The Anycubic Photon Mono M5s Pro is a MSLA 3D printer released in 2024 by Anycubic, with a build volume of 224×126×200 mm and MSRP of €499. Enclosed chamber.
Manufacturer's suggested retail price (MSRP). Not the store price — the actual price may vary.
Our take on the Photon Mono M5s Pro
The Photon Mono M5s Pro is a resin printer for people who want detail above everything else: miniatures, busts, jewellery or small parts where a filament layer would show. Its 10.1-inch 14K monochrome screen (13,312 × 5,120 pixels) gives, according to Anycubic, an XY resolution of 16.8 × 24.8 microns.
What sets it apart in resin is pairing that resolution with speed: Anycubic claims up to 105 mm per hour on average thanks to a low-peel-force release film. In the catalogue, the Elegoo Saturn 4 Ultra is the most direct comparison, with a 10-inch 12K screen.
Worth knowing first: resin calls for gloves, isopropyl alcohol, UV curing and a ventilated space, and the usable volume (about 224 × 126 × 200 mm) is small next to any filament printer. If you're torn between the two technologies, read resin or filament for miniatures. One practical note: when we checked Anycubic's official US store (October 2026), it was listed as sold out.
Written from its specs and the sources cited at the end of this page; we haven't tested it in person.
Technical specifications
| Technology | MSLA |
|---|---|
| Build volume | 224×126×200 mm |
| Weight | 9.4 kg |
| Max speed | — |
| Max acceleration | — |
| Max nozzle temp | — |
| Nozzle material | — |
| Drive | — |
| Flow rate | — |
| Max bed temp | — |
| Bed material | — |
| Auto-leveling | automatic |
| Enclosed | Yes |
| Heated chamber | No |
| AMS compatible | No |
| WiFi | Yes |
| Camera included | Yes (1080p) |
| Official slicer | Photon Workshop |
| OrcaSlicer support | No |
| Power | 120 W |
| Noise | — |
What materials can the Photon Mono M5s Pro print?
The Photon Mono M5s Pro is a resin printer; what follows are the resins it supports, derived from its verified specs.
The Photon Mono M5s Pro is a resin printer (MSLA): it doesn't use filament. It works with standard 405 nm UV resins from virtually any brand (open system): standard, ABS-like/tough, water-washable, flexible and castable. Engineering or high-temperature resins depend on LCD power and ventilation; follow the resin maker's guidance.
Popular comparisons
Own the Photon Mono M5s Pro? Write a review
User opinions, moderated before publishing. hotend doesn't verify purchases.
Sources & references
Specs cross-checked against these public sources:
- Web oficial fabricanteManufacturer page
Specs taken from the sources cited above; we have no recorded date for the last check. Confidence in the data: medium.