Material compatibility
What materials the QIDI Tech Q1 Pro can print
This comes from four facts on its spec sheet: the nozzle reaches 350 °C, the bed 120 °C, and the machine is enclosed with a direct-drive extruder. Those four facts decide most of the list: nozzle temperature sets the ceiling on what you can melt, the bed decides whether the first layer sticks, the enclosure keeps large parts from warping, and the extruder type rules flexibles. We don't test the machine — this is guidance derived from verified data, not a guarantee.
In short: it prints PLA, PETG, TPU (flexible), ABS, ASA, Nylon (PA), Policarbonato (PC) without a fight.
| Material | Prints it? | Why |
|---|---|---|
| PLA | Yes | Yes. PLA has no special needs: any FDM printer like the Q1 Pro prints it out of the box. |
| PETG | Yes | Yes. With a nozzle up to 350 °C and a bed up to 120 °C it comfortably meets PETG's needs. |
| TPU (flexible) | Yes | Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow). |
| ABS | Yes | Yes. Nozzle up to 350 °C and an enclosure: it contains ABS's warping and fumes. |
| ASA | Yes | Yes. Nozzle up to 350 °C and an enclosure: it contains ASA's warping and fumes. |
| Nylon (PA) | Yes | Yes. It reaches 350 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle. |
| Policarbonato (PC) | Yes | Yes. Nozzle up to 350 °C and an enclosure with active heating: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle. |
Sources & references
Specs cross-checked against these public sources:
- Web oficial fabricanteManufacturer page