Flashforge Creator 5 Pro vs Prusa Research CORE One
The Flashforge Creator 5 Pro (2025, €929) and the Prusa Research CORE One (2025, €1,349) are two FDM 3D printers many people compare before buying.
The Flashforge Creator 5 Pro is the more affordable of the two, with a gap of about 420 (~31%) versus the other.
On the technical side, the Flashforge Creator 5 Pro offers more build volume (256³ mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Flashforge Creator 5 Pro €929 | Prusa Research CORE One €1,349 | |
|---|---|---|
| Geometry | ||
| Build volume | 256³ mm 🏆 | 250×220×270 mm |
| Weight | 18 kg | 22.5 kg |
| Speed | ||
| Max speed | 300 mm/s | 600 mm/s 🏆 |
| Max acceleration | 30,000 mm/s² 🏆 | 10,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 320 °C 🏆 | 290 °C |
| Nozzle material | hardened steel | brass (CHT high-flow, 0.4 mm) |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 120 °C | 120 °C |
| Bed material | PEI | PEI plate (textured/smooth) |
| Auto-leveling | automatic | load cell auto mesh |
| Enclosed | Yes | Yes |
| Heated chamber | Yes | Yes |
| Multimaterial | ||
| AMS compatible | Yes | Yes |
| AMS type | toolchanger | MMU3 |
| AMS slots | 4 | 5 🏆 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | Yes |
| Camera | Yes () | — |
| Calibration | ||
| Measures its own vibrations (built-in sensor) | — | No |
| Calibrates flow by itself (sensor) | Yes | — |
| Input shaping | — | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Orca-Flashforge / OrcaSlicer | PrusaSlicer |
| OrcaSlicer | — | Yes |
| Noise | ||
| Noise | 55 dB 🏆 | — |
| Power | 1200 W | 350 W 🏆 |
Verdict
- If speed matters most, the Prusa Research CORE One wins.
- On price, Flashforge Creator 5 Pro is cheaper.
Frequently asked
- Which has better value: Flashforge Creator 5 Pro or Prusa Research CORE One?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Flashforge Creator 5 Pro with 256³ mm.