Creality K1C vs QIDI Tech Plus4
The Creality K1C (2024, €559) and the QIDI Tech Plus4 (2024, €799) are two FDM 3D printers many people compare before buying.
The Creality K1C is the more affordable of the two, with a gap of about 240 (~30%) versus the other.
On the technical side, only the QIDI Tech Plus4 supports multicolor (AMS), and the QIDI Tech Plus4 offers more build volume (305×305×280 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Creality K1C €559 | QIDI Tech Plus4 €799 | |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×250 mm | 305×305×280 mm 🏆 |
| Weight | 12.5 kg | 16 kg |
| Speed | ||
| Max speed | 600 mm/s | 600 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 370 °C 🏆 |
| Nozzle material | hardened steel | hardened steel |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s | 50 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 100 °C | 120 °C 🏆 |
| Bed material | PEI plate | PEI plate |
| Auto-leveling | auto mesh + strain gauge | auto mesh + strain gauge |
| Enclosed | Yes | Yes |
| Heated chamber | No | Yes 🏆 |
| Multimaterial | ||
| AMS compatible | No | Yes 🏆 |
| AMS type | — | QIDI Box |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | Yes |
| Camera | Yes (1080p) | Yes (1080p) |
| Calibration | ||
| Measures its own vibrations (built-in sensor) | Yes | — |
| Calibrates flow by itself (sensor) | — | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Creality Print | Qidi Studio (OrcaSlicer fork) |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | — | — |
| Power | 350 W 🏆 | 1000 W |
Verdict
- On price, Creality K1C is cheaper.
Frequently asked
- Which has better value: Creality K1C or QIDI Tech Plus4?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- QIDI Tech Plus4 with 305×305×280 mm.