Creality Ender 5 S1 vs Sovol SV07 Plus
The Creality Ender 5 S1 (2022, €559) and the Sovol SV07 Plus (2023, €499) are two FDM 3D printers many people compare before buying.
The Sovol SV07 Plus is the more affordable of the two, with a gap of about 60 (~11%) versus the other.
On the technical side, the Sovol SV07 Plus offers more build volume (300×300×350 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Creality Ender 5 S1 €559 | Sovol SV07 Plus €499 | |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×280 mm | 300×300×350 mm 🏆 |
| Weight | 12.6 kg | 13 kg |
| Speed | ||
| Max speed | 250 mm/s | 500 mm/s 🏆 |
| Max acceleration | 5,000 mm/s² | 12,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | brass | — |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 110 °C 🏆 | 100 °C |
| Bed material | PC spring steel | PEI plate |
| Auto-leveling | CR Touch | auto mesh |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | No | Yes |
| Ethernet | No | — |
| Camera | — | — |
| Calibration | ||
| Measures its own vibrations (built-in sensor) | — | — |
| Calibrates flow by itself (sensor) | — | — |
| Input shaping | — | Yes |
| Pressure advance | — | Yes |
| Software | ||
| Official slicer | Creality Print | OrcaSlicer (Sovol fork) |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | — | — |
| Power | 350 W 🏆 | 600 W |
Verdict
- If speed matters most, the Sovol SV07 Plus wins.
- On price, Sovol SV07 Plus is cheaper.
Frequently asked
- Which has better value: Creality Ender 5 S1 or Sovol SV07 Plus?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Sovol SV07 Plus with 300×300×350 mm.