Bambu Lab A1 vs Flashforge Adventurer 5M Pro
The Bambu Lab A1 (2023, €399) and the Flashforge Adventurer 5M Pro (2023, €449) are two FDM 3D printers many people compare before buying.
The Bambu Lab A1 is the more affordable of the two, with a gap of about 50 (~11%) versus the other.
On the technical side, only the Flashforge Adventurer 5M Pro is enclosed (better for ABS and technical materials), and only the Bambu Lab A1 supports multicolor (AMS).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Bambu Lab A1 €399 | Flashforge Adventurer 5M Pro €449 | |
|---|---|---|
| Geometry | ||
| Build volume | 256³ mm 🏆 | 220³ mm |
| Weight | 8.3 kg | 20.1 kg |
| Speed | ||
| Max speed | 500 mm/s | 600 mm/s 🏆 |
| Max acceleration | 10,000 mm/s² | 20,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C 🏆 | 280 °C |
| Nozzle material | stainless steel | brass |
| Drive type | direct | direct |
| Flow rate | 28 mm³/s | 32 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 100 °C | 110 °C 🏆 |
| Bed material | PEI plate | PEI plate (dual-sided) |
| Auto-leveling | load cell + auto mesh | auto mesh one-click |
| Enclosed | No | Yes 🏆 |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes 🏆 | No |
| AMS type | lite | — |
| AMS slots | 4 🏆 | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | Yes |
| Camera | Yes (1080p) | Yes (1080p) |
| Calibration | ||
| Vibration compensation | Yes | Yes |
| Flow calibration | Yes | No |
| Input shaping | Yes | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Bambu Studio | FlashPrint / Orca-Flashforge |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | 48 dB 🏆 | — |
| Power | 1300 W | 350 W 🏆 |
Verdict
- If speed matters most, the Flashforge Adventurer 5M Pro wins.
- On price, Bambu Lab A1 is cheaper.
Frequently asked
- Which has better value: Bambu Lab A1 or Flashforge Adventurer 5M Pro?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Bambu Lab A1 with 256³ mm.