Bambu Lab A1 vs Elegoo Neptune 4 Max
👁 This comparison has been viewed 1 times · 0 this month · 0 this week
The Bambu Lab A1 (2023, €399) and the Elegoo Neptune 4 Max (2023, €470) are two FDM 3D printers many people compare before buying.
The Bambu Lab A1 is the more affordable of the two, with a gap of about 71 (~15%) versus the other.
On the technical side, only the Bambu Lab A1 supports multicolor (AMS), and the Elegoo Neptune 4 Max offers more build volume (420×420×480 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Bambu Lab A1 €399 | Elegoo Neptune 4 Max €470 | |
|---|---|---|
| Geometry | ||
| Build volume | 256³ mm | 420×420×480 mm 🏆 |
| Weight | 8.3 kg | 17.5 kg |
| Speed | ||
| Max speed | 500 mm/s | 500 mm/s |
| Max acceleration | 10,000 mm/s² 🏆 | 8,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | stainless steel | brass |
| Drive type | direct | direct |
| Flow rate | 28 mm³/s | 32 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 100 °C 🏆 | 85 °C |
| Bed material | PEI plate | PEI plate |
| Auto-leveling | load cell + auto mesh | 121-point auto mesh |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes 🏆 | No |
| AMS type | lite | — |
| AMS slots | 4 🏆 | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | Yes |
| Camera | Yes (1080p) | — |
| Calibration | ||
| Vibration compensation | Yes | Yes |
| Flow calibration | Yes | No |
| Input shaping | Yes | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Bambu Studio | Elegoo Cura |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | 48 dB 🏆 | — |
| Power | 1300 W | 1000 W 🏆 |
Verdict
- On price, Bambu Lab A1 is cheaper.
Frequently asked
- Which has better value: Bambu Lab A1 or Elegoo Neptune 4 Max?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Elegoo Neptune 4 Max with 420×420×480 mm.