Anycubic Photon Mono M5s Pro vs Elegoo Jupiter SE
The Anycubic Photon Mono M5s Pro (2024, €499) and the Elegoo Jupiter SE (2023, €629) are two MSLA 3D printers many people compare before buying.
The Anycubic Photon Mono M5s Pro is the more affordable of the two, with a gap of about 130 (~21%) versus the other.
On the technical side, only the Anycubic Photon Mono M5s Pro is enclosed (better for ABS and technical materials), and the Elegoo Jupiter SE offers more build volume (278×156×300 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Anycubic Photon Mono M5s Pro €499 | Elegoo Jupiter SE €629 | |
|---|---|---|
| Geometry | ||
| Build volume | 224×126×200 mm | 278×156×300 mm 🏆 |
| Weight | 9.4 kg | 19.5 kg |
| Speed | ||
| Max speed | — | — |
| Max acceleration | — | — |
| Hot-end | ||
| Max nozzle temp | — | — |
| Nozzle material | — | — |
| Drive type | — | — |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | — | — |
| Bed material | — | — |
| Auto-leveling | automatic | 4-point manual |
| Enclosed | Yes 🏆 | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | No |
| Ethernet | No | — |
| Camera | Yes (1080p) | Yes () |
| Calibration | ||
| Measures its own vibrations (built-in sensor) | No | — |
| Calibrates flow by itself (sensor) | No | — |
| Input shaping | No | — |
| Pressure advance | No | — |
| Software | ||
| Official slicer | Photon Workshop | Chitubox |
| OrcaSlicer | No | — |
| Noise | ||
| Noise | — | — |
| Power | 120 W 🏆 | 180 W |
Verdict
- On price, Anycubic Photon Mono M5s Pro is cheaper.
Frequently asked
- Which has better value: Anycubic Photon Mono M5s Pro or Elegoo Jupiter SE?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Elegoo Jupiter SE with 278×156×300 mm.