Anycubic Kobra 3 vs Creality Ender 3 V3 KE
Full 2026 comparison: side-by-side specs and data-driven verdict.
← Swipe to see more →
| Specifications | Anycubic Kobra 3 €369 | Creality Ender 3 V3 KE €399 |
|---|---|---|
| Geometry | ||
| Build volume | 250×250×260 mm 🏆 | 220×220×240 mm |
| Weight | 9.6 kg | 9.5 kg |
| Speed | ||
| Max speed | 600 mm/s 🏆 | 500 mm/s |
| Max acceleration | 20,000 mm/s² 🏆 | 8,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | brass | copper alloy |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s | 32 mm³/s |
| Bed | ||
| Max bed temp | 110 °C 🏆 | 100 °C |
| Bed material | PEI plate | PEI plate |
| Auto-leveling | LeviQ 3.0 25-point | CR Touch + strain gauge |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes 🏆 | No |
| AMS type | ACE Pro | — |
| AMS slots | 4 🏆 | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | Yes |
| Camera | Yes (720p) | — |
| Calibration | ||
| Vibration compensation | Yes | Yes |
| Flow calibration | Yes | Yes |
| Input shaping | Yes | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Anycubic Slicer Next | Creality Print |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | — | — |
| Power | 400 W | 350 W 🏆 |
Verdict
- If speed matters most, the Anycubic Kobra 3 wins (600 mm/s vs 500 mm/s).
- On price, Anycubic Kobra 3 is cheaper.
Frequently asked
- Which has better value: Anycubic Kobra 3 or Creality Ender 3 V3 KE?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Anycubic Kobra 3 with 250×250×260 mm.